Tape on every seam
Paper or mesh, chosen for the joint.

Drywall Installation & Finishing
Tape, three coats of compound and careful sanding turn hung board into a smooth, paint-ready surface.
Call or text today615-431-3789Drywall Taping & Finishing
Taping and finishing is the craft that decides how a room looks once it is painted. Paper or mesh tape bridges every seam, compound fills and feathers each joint, and corner bead gives outside corners a crisp edge. Each coat is allowed to dry, then sanded so the surface is flat and even.
We tape and finish drywall for homeowners and builders across Nashville and Middle Tennessee. We match the finish level to the room and the paint, control dust while sanding and check the walls in raking light before we call them done.
What you get
Paper or mesh, chosen for the joint.
Thin coats feathered wide for flat joints.
Dust controlled and surfaces checked in raking light.
Inside and outside corners finished cleanly.
The process
Seams are taped and screws and beads covered.
Coats are feathered and allowed to dry.
We sand smooth and check in angled light.
FAQ
Most walls get three coats over the tape and screws, with light sanding between them.
It depends on humidity and thickness, but each coat usually needs a day or less. We schedule around the weather.
Finish levels describe how smooth the surface is. Our Level 5 page explains the highest level.
Service areas
From Clarksville to Shelbyville and Dickson to Cookeville, pick your city to see the drywall work we handle in your part of Middle Tennessee.
Not on the list? Call 615-431-3789. We take projects across Middle Tennessee.
Call, text or send the form. Tell us about the room, where you are and what is going on, and we will take it from there.